Pg50

PVC glue (50 mL)

PVC glue (50 mL)

This is designed for quick and qualitative repair of inflatable boats made of PVC-based materials. It makes a robust flexible joint that is resistant to water and atmospheric effects. It can also be used for gluing and repairing other PVC products.
Application: To enhance heat resistance and bonding strength, the glue can be used in a two-component mixture with a hardener DESMODUR RC. Apply a thin layer of the glue on a dry surface that has preliminarily been cleaned and degreased with alcohol or ethyl acetate and wait for 3-5 minutes. Apply a second layer of the glue and wait for 5 minutes. (The adhesive film is neither to stick to your fingers nor to be cloudy or glazed). Heat the surfaces to be glued up to 60° C. Place one surface on the other carefully and press them together firmly (roll on). The joint will acquire sufficient strength within 5 - 15 min. The strength increases with time. Inflatable cylinders that have tears or punctures of 5 cm or more are to be repaired from both inside and outside. Keep the glue away from fire! Use it in a well-ventilated area, using personal protective equipment! Shelf life of the glue is 18 months.
Characteristics
CodePg50
Dimensions, a*b*c mm-mm
The volume of the box , m3.0.008999999999999999 m3
Packing dimensions305*150*200mm
Quantity8pc.
Weight of packing- kg
Including aluminum weight, g- g
Weigh0.15
Color-