Repair and installation

Pg40 Клей полиуретановый двухкомпонентный 40 мл.

Предназначен для быстрого и качественного ремонта надувных лодок, изготовленных из материалов на основе ПВХ. Оставляет эластичный прочный шов, стойкий к воздействию воды и атмосферных явлений. Может использоваться для склейки и ремонта других изделий из ПВХ. Применение: Для повышения ...

Pg50 PVC glue (50 mL)

This is designed for quick and qualitative repair of inflatable boats made of PVC-based materials. It makes a robust flexible joint that is resistant to water and atmospheric effects. It can also be used for gluing and repairing other PVC products. Application: To enhance heat resistance ...

Kn222 Nut knob

Knob-nut is used to tighten threaded joints of the FASTen® accessories.

Kn223 Screw knob

This is used as a fastener. The design of the knob provides for a nut or bolt to be used as the working component. This makes it possible to use the knob for tightening threaded and splined joints of the FASTen accessories.

Kn224 Universal handle

This is used as a fastener. It has enhanced leverage thus allowing for a reliable tightening of big items. It can also be used instead of the Kn222 and Kn223 knobs.

Hb227 Strap holder, 2 pcs

These are designed to secure straps and are used as railholders. They can also be used to secure an awning, luggage or equipment. They are mounted on a hard or inflatable side between any FASTen® mounting platform and a mount. One or two holders are mounted at angles of 180°, 155° and ...

Hr227 Halyard holder, 2 pcs

These are designed to secure halyards and are used as railholders. They can also be used to securer an awning, luggage or equipment. They are mounted on a hard or inflatable side between any FASTen® mounting platform and a mount. One or two holders are mounted at angles of 180°, 155° and ...

Mia Swivelling mounting platform (Ø 60 mm)

This is a mounting platform with internal splines for installing any accessories having a flat surface into a mount. The kit includes an adapter for installation in a mount and a platform for an accessory. An accessory is secured on the platform with four male screws. The platform is ...

Sb038 Splined and ball joint retainer Ø 1.5'' / 38 мм

This is used as an adapter between the splines of the FASTen® adapters and the ball element. One side of the retainer has splines and the other has hemispheres. Rotation of the nut knob tightens two halves of the retainer together around the ball and the adapter splines. Thus, this ensures ...

Ta221 Swivel and tilt assembly

This FASTen® assembly replaces theAf221 adapter and allows for tilting and swivelling a FASTen® device fitted in a mount. Using with the Ta221 mounting platforms for equipment and the Ex extenders allows for creation of more complex and multi-purpose designs. This increases the ...

TAb218 Swivel and tilt joint with mounting platform and mount kit for hard side

This is used to fit any accessories with a flat surface in the mount. The set includes a mounting platform and a mount kit for hard side. An accessory is secured on the platform with the use of four male screws. The platform is equipped with a swivel and tilt gear for easy position ...

TAm218 Swivel and tilt joint with mounting platform

This is used to fit any accessories with a flat surface in the mount. An accessory is secured on the platform with the use of four male screws. The platform is equipped with a swivel and tilt gear for easy position adjustment of a mounted accessory.

Af221 Adapter

This adapter is fitted into the universal FASTen® mount and designed to join the mount to various accessories. It allows for implementing various design solutions in the equipment of a vessel.

Ah264 Mount-to-mount adapter

This is designed to join products to the mounts. It enables rotation of the products around their axes.

As221 Swivel gear

This is used to rotate an accessory around its axis while fitted in the universal mount without the need for disconnection. The gear is compatible with all accessories that have a tilt assembly.