Mounting platforms

Mb Mounting platform for installation on hard side

This is used to install a FASTen® mount on a hard side of a vessel. Mounted on a side with four wood or male screws. The mount is installed on the platform.

Fr444 Universal platform

This is designed for self­installation of a mount or optional equipment on a hard side of a watercraft. It is mounted on a hard side of a watercraft with the use of four wood or male screws (included). It enables attachment of various types of equipment on the side. It is suitable for most ...

Mp224 Glue-on PVC mount pad (110 х 110 mm) for inflatable side

This PVC mount pad is used to install the FASTen® mount on a side of an inflatable boat (by gluing the pad anywhere on the inflatable side). It is recommended to place the mount pads relative to the cylinder as per instructions given on the pad. This will properly install the mount and ...

Mp225 Glue-on PVC mount pad (140 х 140 mm) for inflatable side

This PVC mount pad with an enlarged glue-on surface enables the installed FASTen® accessories to withstand heavier loads. It is recommended for use with oarlocks, anchor locks, mooring cleats, etc. It is recommended to place the mount pads relative to the cylinder as per instructions given ...

Mr125 Mounting platform for installation of mount on Ø22/25 mm tube

This allows for quick installation of the Fs219 mount on Ø22/25 мм tube on one side of the mounting platform. It is suitable for installation on a hard rail (tubular rail) of yachts and motor boats or round rails. No drilling of the tube is required. The loosened retention screws allow ...

Mr132 Mounting platform for installation of mount on Ø30/32 mm tube

This allows for quick installation of the Fs219 mount on Ø30/32 мм tube on one side of the mounting platform. It is suitable for installation on a hard rail (tubular rail) of yachts and motor boats or round rails. No drilling of the tube is required. The loosened retention screws allow ...

Mr225 Mounting platform for installation of two mounts on Ø22/25 mm tube

This allows for quick installation of the two Fs219 mounts on Ø22/25 мм tube. It is suitable for installation on a tubular rail of yachts and motor boats or round rails. The platform is mounted on a tube and then mounts are attached to it (one on each flat end of the platform). The ...

Mr232 Mounting platform for installation of two mounts on Ø30/32 mm tube

This allows for quick installation of the two Fs219 mounts on Ø30/32 мм tube. It is suitable for installation on a tubular rail of yachts and motor boats or round rails. The platform is mounted on a tube and then mounts are attached to it (one on each flat end of the platform). The ...

Fr222 Universal platform for installation on C-shaped track

This is designed for self­installation of a mount and optional equipment on a C shapedtrack. It is convenient for use in kayaks whose track does not face the inner space of the watercraft but directed upwards. The set includes two nut knobs for changing the position of the platform along ...

Mc Mounting clip

The mounting clip makes it possible to secure pieces of equipment on a tube, railing, handrails, mast or track without drilling. Thanks to the elastic inner coating, the clip can clamp items of round, square and rectangular cross-section. The set includes a coupling bolt and nut to keep ...